21 oct 2026 · 1 - Inspection
Puntuación 96
- Hallazgo Problemas con el lavado de manos
El personal no se lavaba las manos cuando debía, o un lavamanos estaba bloqueado, sin jabón ni toallas de papel, o se usaba para otra cosa. Las manos son una de las formas más comunes en que los gérmenes llegan a la comida.
Redacción oficial (en inglés): Handwashing sinks supplied & accessible
Nota del inspector (en inglés): Observation: Staff member observed wringing out wiping cloth in hand sink.; CDI: Educated staff member and directed to dish sink for this task; Hand sink was cleaned after this task. 5-205.11 Using a Handwashing Sink - Operation and Maintenance (Pf) A handwashing sink shall be maintained so that it is accessible at all times for employee use and may not be used for purposes other than handwashing. - Hallazgo Problemas de limpieza o desinfección
Los platos, equipos o superficies que tocan los alimentos no se lavaban, enjuagaban y desinfectaban correctamente, o el desinfectante no tenía la concentración adecuada. Las superficies limpias ayudan a evitar que los gérmenes lleguen a la comida.
Redacción oficial (en inglés): Food-contact surfaces: cleaned & sanitized
Nota del inspector (en inglés): Observation: When checked the hot water final rinse was found at 147F and 149F - Unable to reach 160F final rinse; The rinse cycle on the machine is tripping the booster system; Operator has ordered another dish machine to be installed 11/2/26; CDI: Staff directed to sanitzie dishware and utensils in the dish sink after wahsing in dish machine. Follow up for machine replacement by 11/2/26 4-703.11 Hot Water and Chemical - Methods (P) After being cleaned; EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be SANITIZED in: (A) Hot water manual operations by immersion for at least 30 seconds; or (B) Hot water mechanical operations by achieving a UTENSIL surface temperature of 160F as measured by an irreversible registering temperature indicator; or (C) Chemical manual or mechanical operations; applying SANITIZING chemicals by immersion; manual swabbing; brushing; or pressure spraying. Contact times shall be consistent with those on EPA-registered label use instructions by providing a minimum contact time of: (1) Except as specified under (C)(2); 10 seconds for a chlorine solution; (2) 7 seconds for a chlorine solution of 50ppm that has a pH<10 and a temperature of 100F+ or a pH of <8 and a temp of 75F+; (3) 30 seconds for other chemical SANITIZING solutions; or (4) when evaluated for efficacy; yields a 5 log reduction - Hallazgo Alimentos a una temperatura insegura
Los alimentos no se mantenían lo suficientemente fríos o calientes, no se enfriaban con la rapidez necesaria, o no se cocinaban o recalentaban a la temperatura correcta. Las bacterias crecen rápido en la "zona de peligro" entre 41 °F y 135 °F (5 °C a 57 °C), por lo que esta es una de las revisiones de seguridad alimentaria más importantes.
Redacción oficial (en inglés): Proper cooling time & temperatures
Nota del inspector (en inglés): Observation: lasagna was found at 96F after being cooled for (2) two hours unable to reach 70F. CDI: Lasagna was removed from walk in and reheated to 168F to begin cooling process again; Lasagna was placed on pan of ice; uncovered and placed in wlak in freezer; Observed down to 108F after 40 minutes; PIC to continue with this cooling process to ensure proper cooling of lasagna. 3-501.14 Cooling (P) (A) Cooked TCS FOOD shall be cooled from 135F to 70F within 2 hours and from 135F to 41F or less within a total of 6 hours. P - Hallazgo Problemas de limpieza o desinfección
Los platos, equipos o superficies que tocan los alimentos no se lavaban, enjuagaban y desinfectaban correctamente, o el desinfectante no tenía la concentración adecuada. Las superficies limpias ayudan a evitar que los gérmenes lleguen a la comida.
Redacción oficial (en inglés): Non-food contact surfaces clean
Nota del inspector (en inglés): Observation: The rear panel in the back of the ice machine and the single service dispenser at the wait station are accumulated with debris; Increase cleaning schedule for these areas. 4-602.13 Nonfood Contact Surfaces (C) Nonfood Contact Surfaces of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.